3D printing quote

2 · Pick your colour

Tap more than one for a multi-colour print. Each extra colour needs a manual filament swap mid-print, so it adds 32 SAR. Specialty finishes cost a little more per gram.

Your model

Optional, but it makes the price real.

⇩ Drop your model here, or click to choose STL, OBJ or 3MF. Up to 60 MB.

Give us the file and we measure it: volume, size, and what it will actually weigh. Without it you are guessing at grams, and so are we.

3 · Describe the print

Part weight (grams)

Your slicer shows this. Don't have it? Use the volume estimator below.

Print time (hours)

Also from your slicer. A rough estimate is fine.

Don't know the weight? Estimate it from volume

Model volume (cm³)

Infill (%)

Approximate — assumes a solid shell with the rest filled to your infill percentage.

Hands-on time (minutes)

Slicing, setup, removing the part, cutting supports, finishing.

Quantity

10+ units: 5% off · 25+ units: 10% off

4 · Finishing (optional)

Sanding & smoothing Layer lines sanded down to a smooth, even surface. +64.00 Primer coat Sanded, then primed - ready for you to paint. +88.00 Painted finish Sanded, primed, and painted in the colour you choose. +176.00 Assembly & gluing Multi-part models glued and assembled into one piece. +96.00 Threaded inserts Heat-set brass inserts for parts that need to be screwed together. +64.00 Rush order Jump the queue — we start your job next. ×2.00

5 · Anything we should know?

Notes

What your print will cost

1 · Choose your material

2 · Pick your colour

Your model

3 · Describe the print

4 · Finishing (optional)

5 · Anything we should know?