3D printing

What your print will cost

Enter your part. The price updates as you go.

1 · Choose your material

PLA 0.32/g Everyday workhorse. Crisp detail, easy to print, matte finish. Not for heat or outdoors. PLA+ 0.38/g Tougher PLA. Less brittle, better layer bonding. Good for functional parts under light load.

2 · Pick your colour

Tap more than one for a multi-colour print. Each extra colour needs a manual filament swap mid-print, so it adds 32 SAR. Specialty finishes cost a little more per gram.

Your model

Optional, but it makes the price real.

⇩ Drop your model here, or click to choose STL, OBJ or 3MF. Up to 60 MB.

Give us the file and we measure it: volume, size, and what it will actually weigh. Without it you are guessing at grams, and so are we.

3 · Describe the print

Infill (%)

How solid the inside is. Lower is lighter and cheaper; higher is stronger. Walls and the top and bottom stay solid either way.

Part weight (grams)

Your slicer shows this. Don't have it? Use the volume estimator below.

Print time (hours)

Also from your slicer. A rough estimate is fine.

Don't know the weight? Estimate it from volume

Model volume (cm³)

Approximate — assumes a solid shell with the rest filled to your infill percentage.

Hands-on time (minutes)

Slicing, setup, removing the part, cutting supports, finishing.

Quantity

10+ units: 5% off · 25+ units: 10% off

4 · Finishing (optional)

Sanding & smoothing Layer lines sanded down to a smooth, even surface. +64.00 Primer coat Sanded, then primed - ready for you to paint. +88.00 Painted finish Sanded, primed, and painted in the colour you choose. +176.00 Assembly & gluing Multi-part models glued and assembled into one piece. +96.00 Threaded inserts Heat-set brass inserts for parts that need to be screwed together. +64.00 Additional support For models with steep overhangs: extra support material, plus the careful work of removing it cleanly. +56.00 Rush order Jump the queue — we start your job next. ×2.00

5 · Anything we should know?

Notes

Cost breakdown

Updates live

Material cost -

Labour and service -

Everything it takes to make it: our machines running your job, staff time preparing the file and finishing the piece by hand, any finishing services you chose, and setup.

Tax -

Overall cost -

Create an account

This is an estimate. Once we open your file the price can change, up or down. We send you the confirmed price to accept before anything is made.